Technical Data
Headset Monitor KAH6
KAH6 works especially with talkback and program (IFB)
Dimensions: 1RU, depth 150mm without connectors
Weight: 2 kg
Inputs:
1x stereo input L,R for program at 2x XLR-3pin female +6dBu > 5 KOhm
with level control PT at front
1x talkback input TB at 1x Sub-D-9pin female +6dBu > 1 KOhm
with levelcontrol TB at front
Powervoltage: Sub-D-9pin male 15VDC
Powercurrent: 0,5A
Powerconsumption: 6W max.
Outputs:
1x stereo output L,R for monitor loudsp. at 2x XLR-3pin male +6dBu < 60 Ohm
Frequency response: L,R stereo output 40Hz-20KHz (-1dB)
Noise: L,R stereo output better -90dBA below +6dBu
Distortion: L,R stereo output better than 0,1%
1x talkback output TB at 1x Sub-D-9pin female -40dBu < 1 KOhm
Frontcontrol:
4x headset input 1-4 at 4x XLR-5pin female -40dBu > 5 KOhm for electret micro
4x headset stereo output 1-4 at 4x XLR-5pin female
max. 2x 3V RMS < 1KOhm at front with 4x level control 1-4 for stereo phone
Frequency response: headset stereo output 40Hz-20KHz (-1dB)
Noise: headset stereo output better -90dBA below +6dBu
Distortion: headset stereo output better than 0,1%
level control TB and PT see inputs
level control D attenuate the level for program if talkback is active (IFB)
in this case the LED D shines red
rotary switch LS,0,HS switches between LS = monitor loudspeaker L,R output
and HS = headsets 1-4, the position 0 switches all outputs off
2x stereo jacks HP for headphones is connected to all headsets XLR's 1-4
Here it is possible to connect for example max.10x headphones to a phonebox.